Kia Rio Manuals Rio Car Manuals
Technical Info

Kia Rio: Seat Heater Inspection - Seat Electrical - Body Electrical System - Kia Rio UB 2012-2020 Service ManualKia Rio: Seat Heater Inspection

Driver seat and Passenger seat
1.
Check for continuity and measure the resistance between terminals.
[Cushion]


Pin No.
Description
Pin No.
Description
1
Heater(-)
4
NTC -
2
Heater(+)
5
NTC +


Average Max. temperature
- Cushion : HIGH : 42 2C / LOW : 39 2C
- Back : HIGH : 52 2C / LOW : 46 2C

2.
Operate the seat heater after connecting the connector, and then check the thermostat by measuring the temperature of seat surface.

Standard value (Fabric / Leather)
- Cushion : 1.18Ω 10%
- Back : 1.13Ω 10%
- Set : 2.31Ω 10%

Seat Heater Components
...
Seat Heater Switch Schematic Diagram
...
See also:

Ambient Temperature Sensor Inspection
1. Turn the ignition switch OFF. 2. Disconnect ambient temperature sensor. 3. Check the resistance of ambient t ...

Hazard Lamp Switch Removal
1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or trim remover, remove the hazard lamp switch (A). ...

Troubleshooting
Problem Symptoms Table Before replacing or repairing air conditioning components, first determine if the malfunction is due to the refrigerant charge, air flow or compressor. Us ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts