Kia Rio Manuals Rio Car Manuals
Technical Info

Kia Rio: Special Service Tools - Automatic Transaxle System - Kia Rio UB 2012-2020 Service ManualKia Rio: Special Service Tools

Tool
(Number and Name)
Illustration
Use
09200-3N000
Engine support fixture (Beam)


Removal and installation of the transaxle.
Use this adapter (SST No. : 09200-1P100, 4X000) with the supporter (SST No. : 09200-2S200).
※Permit operating with 09200-38001.
09200-1P100
Engine support fixture (Adapter)


Removal and installation of the transaxle.
Use this beam (SST No. : 09200-38001/09200-3N000) with the supporter (SST No. : 09200-2S200) and adapter (SST No. : 09200-4X000)
09200-4X000
Engine support fixture (Adapter)


Removal and installation of the transaxle.
Use this beam (SST No. : 09200-38001/3N000) with the supporter (SST No. : 09200-2S200) and adapter (SST No. : 09200-1P100)
09200-2S200
Engine support fixture
(Supporter)


Removal and installation of the transaxle.
Use this beam (SST No. : 09200-38001/09200-3N000) with the adapter (SST No. : 09200-1P100, 4X000)
09452-26100
Oil seal installer


Installation of transaxle case oil seal.
[Using with handle (SST No.:09231-H1100)]
09231-H1100
Bar


Installation of transaxle case oil seal.
[Using with oil seal installer (SST No.:09452-26100)]
09480-A3800
Inhibitor switch guide pin




※ Engine support fixture special tool assembly drawing


1. 09200-3N000(Main bar)
2. 09200-3N000(Sub bar)
3. 09200-3N000(Handle)
4. 09200-3N000(Stopper)
5. 09200-3N000(Bolt-1)
6. 09200-4X000 (Adapter)
7. 09200-1P100(Supporter)
8. 09200-2S200(Supporter)
9. 09200-3N000(Nut)
10. 09200-3N000(Snap ring)
11. 09200-3N000(Sub fixture)
12. 09200-3N000(Stopper)
13. 09200-3N000(Nut)
14. 09200-2S100(Spacer)
15. 09200-1P100(Sub fixture)
16. 09200-1P100(Nut)
17. 09200-3N000(Pin)

Lubricants
Item  Specified lubricant  Quantity Transaxle fluid ATF SP-Ⅳ or equivalent  7.3L (1.93 U.S gal.,  7.71 U.S.qt., 6.42 Imp.q ...
Automatic Transaxle
...
See also:

Roll Over Valve (ROV): Repair procedures
Removal 1. Remove the fuel pump. (Refer to Engine Control/Fuel System - “Fuel Pump”) 2. Remove the roll over valve (A) after releasing ...

Steering Column and Shaft Adjustment
After or before servicing the EPS system, perform the troubleshooting and test procedure as follows. Compare the system condition with normal condition in the table below and if abnormal symp ...

Component Location
1. Power door mirror 2. Power door mirror switch 3. Folding mirror switch ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts