Rio Car Manuals
Technical Info

Kia Rio: Sunroof Switch Inspection

1.	Disconnect the negative (-) battery terminal.

2.	Using a screwdriver or remover, remove the overhead console cover (A).

3.	After loosening the mounting screws, then remove the overhead console assembly (A).

4.

Check for continuity between the terminals. If the continuity is not as specified, replace the sunroof switch.

1. Ground
2. Switch A

3. Switch B
4. Switch C

Circuit Diagram

...

Sunroof Motor Replacement

1. Disconnect the negative (-) battery terminal. 2. Remove the roof trim. (Refer to the BD group - " Roof trim") ...

See also:

TPMS Sensor Replacement
Repair tire after using the Tire Mobility Kit (TMK) When the TPMS warning lamp OFF 1. Remove the TMK repaired tire, wheel and TPMS sensor. (Refer to ...

Room Lamp Installation
Room Lamp 1. Install the room lamp assembly after connecting the room lamp connector. 2. Install the room lamp lens. ...

Accelerator Pedal Installation
1. Installation is reverse of removal. Accelerator pedal module installation nut: 12.7 ~ 15.7 N.m (1.3 ~ 1.6 kgf.m, 9.4 ~ 11.6 lb- ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts