Rio Car Manuals
Technical Info

Kia Rio: Tire Installation

1.	Apply tire soap or lubrication to the top and bottom tire beads.

2.	To fit the bottom bead, position the valve at the 5 o’clock position relative to the head on the tire changing machine.

3.	Place the tire on the rim so the bottom bead touches the edge of the rim after the valve (6 o’clock). Rotate the rim clockwise, and push down on the tire at the 3 o’clock position to fit bottom bead.

4.	After bottom bead is on tire, rotate the rim until the valve is at the 5 o’clock position relative to the head on the tire changing machine. Push down on the tire at the 3 o’clock position and rotate the rim clockwise to fit the top bead.

5.

Inflate the tire until both beads seat.

Tire presuure : 2.2kg/cm² (32psi)

Tire Removal

1. Remove valve core and deflate the tire. 2. Remove the side of the tire bead area from the wheel using tire changing machine . ...

Tire Pressure Monitoring System

...

See also:

General Troubleshooting Information
Before Troubleshooting 1. Check applicable fuses in the appropriate fuse/relay box. 2. Check the battery for damage, state of charge, and cl ...

Description
The charging system included a battery, an alternator with a built-in regulator, and the charging indicator light and wire. The Alternator has eight built-in diodes, each rectifying AC curre ...

Relay Box (Passenger Compartment) Installation
1. Install the interior junction box. 2. Install the crash pad lower panel. 3. Check that all system operates n ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts