Kia Rio: TPMS Sensor Description

Mode

(1)

Normal Fixed Base State

A.	Sensor transmissions continue at the Low Line (Base) configuration defined rates until the state is either changed by LF command or by the sensor detecting a condition that requires a temporary change to another state.

B.	The LF command to this state must contain the sensors ID.

C.	Sensor Mode should be change from Storage to Normal Fixed when pressure is about 20psi over.

(2)

Storage Auto State:

A.	This state is a Low current consumption state.

B.	Sensors are in this state when they first arrive at the dealership (either on the vehicle or as replacement spares).

C.	In this state, the sensor does not measure pressure / temperature / battery level.

D.	The sensor will not transmit in this state unless requested to do so by the initiate command.

(3)

Alert State:

A.	The sensor automatically enters this state if the measured temperature exceeds 230 °F(110 °C) and over temperature shutdown is likely.

B.	In this state, pressure is measured every 4 seconds and RF data transmitted every 4 seconds.

C.	The state lasts for 1 minute if it is pressure triggered.

D.	This state is alse entered when a 3 psi change in pressure from the last RF transmission occurs.

TREAD Lamp - Tire Under Inflation / Leak Warning. 1. Turn on condition A. When tire pressure is below a ...

Handle the sensor with care. 1. Remove the tire. (Refer to "Tire Removal") ...