Kia Rio: Underdrive Brake Control Solenoid Valve(UD/B_VFS) Removal

Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the hydraulic pressure will need to be adjusted after replacing the VFS solenoid valve. If replacing the VFS solenoid valve; also replace the valve body assembly. (Refer to "Valve Body" in this group)

Underdrive Brake Control Solenoid Valve(UD/B_VFS) Inspection

1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor ...

Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Description

Overdrive clutch control solenoid valve(OD/C_VFS) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the overdrive clutch. ...

Kia Rio: Underdrive Brake Control Solenoid Valve(UD/B_VFS) Removal

Underdrive Brake Control Solenoid Valve(UD/B_VFS) Inspection

Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Description

See also: