Kia Rio: Wheel Hub Nut Tightening Sequence

Tighten the hub nuts as follows.

Tightening torque :

88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)

•	When using an impact gun, final tightening torque should be checked using a torque wrench.

•	A wheel that is not the correct size may adversely affect wheel and bearing life, braking and stopping abilities, handling characteristics, ground clearance, body-to-tire clearance, snow chain clearance, speedometer and odometer calibration, headlight aim and bumper height.

Run out inspection

1.	Jack up the vehicle.

Measure the wheel Run-out by using a dial indicator as illustration below.

3.	If measured value exceeds the standard value, replace the wheel.

When using a commercially available computerized wheel alignment equipment to inspect the rear wheel alignment, always p ...

• Using tires and wheel other than the recommended sizes could cause unusual handling ch ...