Kia Cee'd: Troubleshooting / A/C Pressure Transducer Repair procedures
Kia Cee'd JD Service Manual / Heating,Ventilation, Air Conditioning / Troubleshooting / A/C Pressure Transducer Repair procedures
| Inspection |
| 1. |
Measure the pressure of high pressure line by measuring voltage output
between terminal “1” and “2”.
|
| 2. |
Inspect the voltage value whether it is sufficient to be regular value
or not.
|
| 3. |
If the measured voltage value is not within the specification, replace
the A/C pressure transducer.
|
| Replacement |
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Recover the refrigerant with a recovery/charging station.
|
| 3. |
Disconnect the A/C pressure transducer connector (A).
|
| 4. |
Remove the A/C pressure transducer (A).
|
| 5. |
Install in the reverse order of removal.
|
A/C Pressure Transducer Description and operation
Description
The A/C Pressure Transducer (APT) converts the pressure value of high pressure
line into voltage value after measuring it. By converted voltage value, engine
ECU cont ...
Evaporator Temperature Sensor Description and operation
Description
The evaporator temperature sensor will detect the evaporator core temperature
and interrupt compressor relay power in order to prevent evaporator from freezing
by exc ...
Other information:
Kia Cee'd JD Service Manual: Rail Pressure Sensor (RPS) Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the RPS at idle and various engine speed.
Condition
Output Voltage (V)
...
Kia Cee'd JD Service Manual: Power Seat Control Switch Repair procedures
Inspection
1.
With the power seat switch in each position, make sure that continuity
exists between the terminals below. If continuity is not as specified,
replace the power seat switch.
A : Power seat control switch
B : Lumbar support swi ...