Kia Cee'd: Manual Transaxle Control System / Control Shaft Complete Repair procedures

Kia Cee'd JD Service Manual / Manual Transaxle System / Manual Transaxle Control System / Control Shaft Complete Repair procedures

Removal

1.	Move the shift lever to neutral gear position.

2.	Remove the air cleaner assembly. (Refer to Engine Mechanical System - "Air Cleaner")

3.	Remove the battery and battery tray. (Refer to Engine Electrical System - "Battery")

4.	Remove the control cable (B) from the control shaft after removing the pins (A).

Remove the control shaft complete (A).

Tightening torque :

19.6 ~ 26.5 N.m (2.0 ~ 2.7 kgf.m,14.5 ~ 19.5 lb-ft)

Installation

1.	Install in the reverse order of removal.

•	Install the control shaft complete after setting the neutral state.

•

Apply the sealant to the contact surface of transaxle and control shaft.

Specified sealant : Anaerobic adhesive for flange

Control Shaft Complete Components and components location

Components Location 1. Control Shaft Complete ...

Dual Clutch Transmission(DCT) System

...

Kia Cee'd JD Service Manual: ESCL(Electronic Steering Column Lock) Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remoove the driver crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Remove the steering column shroud upper ...

Kia Cee'd JD Service Manual: Specifications
Specifications Transaxle model M6CF1 Engine type Gasoline 1.6 MPI Gasoline 1.6 GDI Manual transalxe oil Quantity 1.6 ~ 1.7 ℓ (0.42 ~ 0.45 U.S.gal., 1.69 ~ 1. ...