Kia Cee'd: Clutch Switch / Description and operation
| Description |
Clutch switch is connected to clutch pedal and transmits clutch operating state
to ECM.
When clutch pedal is depressed during driving, engine load changes from loaded
to none loaded condition. However, ECM regards vehicle to be loaded becuase
VSS signal is still inputted to it. therefore, ECM controls none loaded engine
with the condition suitable for loaded engine.
Accordingly, optimum fuel injection control is not performed then, RPM becomes
unstable and smoke is produced.
Clutch operation is detected through clutch switch signal. This signal enables
ECM to cope with instant change of load condition.
Besides, clutch switch signal is used to detect engaged gear with vehicle speed
and engine speed.
Clutch Switch
...
Specifications
Specifications
Item
Specifications
Working voltage
DC
12V
Operating force
14.7 ± ...
Other information:
Kia Cee'd JD Service Manual: Smart Key Diagnostic Repair procedures
Inspection
Self Diagnosis With GDS
Smart key system defects can be quickly diagnosed with the GDS. GDS operates
actuator quickly to monitor, input/output value and self diagnosis.
The following three features will be major problem in SMART KEY system.
1.
...
Kia Cee'd JD Owners Manual: Important - use of compact spare tire
Your vehicle is equipped with a compact
spare tire. This compact spare
tire takes up less space than a regular-
size tire. This tire is smaller than a
conventional tire and is designed for
temporary use only.
CAUTION
You should drive carefully
when the compact spare is in
use. T ...