Kia Cee'd: SRSCM / Front Impact Sensor (FIS) Description and operation

The front impact sensor (FIS) is installed in the front side member. They are remote sensors that detect acceleration due to a collision at its mounting location. The primary purpose of the Front Impact Sensor (FIS) is to provide an indication of a collision. The Front Impact Sensor (FIS) sends acceleration data to the SRSCM.

SRS Control Module (SRSCM) Repair procedures

Removal 1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes befo ...

Front Impact Sensor (FIS) Components and components location

Components ...

Other information:

Kia Cee'd JD Service Manual: Crankshaft Position Sensor (CKPS) Description and operation
Description Crankshaft Position Sensor (CKPS) detects the crankshaft position and is one of the most important sensors of the engine control system. If there is no CKPS signal input, the engine may stop because of CKPS signal missing. This sensor is installed in ladder fra ...

Kia Cee'd JD Service Manual: Water Temperature Control Assembly Components and components location
Components   1. Water temperature control assembly 2. Water temperature sensor 3. Gasket 4. Water 5. Bypass hose ...