Kia Cee'd: Restraint / SRSCM
Kia Cee'd JD Service Manual / Restraint / SRSCM
- SRS Control Module (SRSCM) Description and operation
- SRS Control Module (SRSCM) Components and components location
- SRS Control Module (SRSCM) Repair procedures
- Front Impact Sensor (FIS) Description and operation
- Front Impact Sensor (FIS) Components and components location
- Front Impact Sensor (FIS) Repair procedures
- Side Impact Sensor (SIS) Description and operation
- Side Impact Sensor (SIS) Components and components location
- Side Impact Sensor (SIS) Repair procedures
- PAB ON/OFF Switch Description and operation
- PAB ON/OFF Switch Components and components location
- PAB ON/OFF Switch Repair procedures
Components and components location
Components [LHD]
1. Driver Airbag (DAB)
2. Steering Wheel
3. Clock Spring
4. Seat Belt Pretensioner (BPT)
5. Side Impact Sensor (SIS)
6. Side A ...
SRS Control Module (SRSCM) Description and operation
Description
The primary purpose of the SRSCM (Supplemental Restraints System Control Module)
is to discriminate between an event that warrants restraint system deployment
and an ...
Other information:
Kia Cee'd JD Service Manual: Components and components location
Component Location
1. Head lamp(High)
2. Head lamp(Low)
3. Position lamp
4. Turn signal lamp
5. Static bending lamp
6. Front fog lamp
7. DRL
8. Side repeater lamp (Door mirror)
9. Side repeater lamp
10. Overhead cons ...
Kia Cee'd JD Owners Manual: Static bending light
While driving the corner, for your sight
and safety, the static bending light turns
on automatically. The system will operate
automatically as follows:
When vehicle speed is under 10km/h
and steering wheel angle approximately
80 degrees.
When vehicle speed is over 10km/h
and ste ...