Kia Cee'd: SRSCM / PAB ON/OFF Switch Description and operation
| Description |
Driver can control the passenger airbag operating Condition (Enable or Disable)
by using this PAB ON/OFF switch.
Passenger Airbag (PAB) ON/OFF Switch is installed in the crash pad side cover.
Side Impact Sensor (SIS) Repair procedures
Removal
Side Impact Sensor
1.
Disconnect the battery negative cable and wait for at least three minutes
before beginning work.
2.
...
PAB ON/OFF Switch Components and components location
Components
...
Other information:
Kia Cee'd JD Service Manual: Brake Booster Repair procedures
Brake Booster Operating
Test
For simple checking of the brake booster operation, carry out the following
tests.
1.
Run the engine for one or two minutes, and then stop it. If the pedal
depresses fully the first time but gradually becomes higher when ...
Kia Cee'd JD Service Manual: Components and components location
Components
1. Rear door tirm
2. Rear door inside handle housing
3. Rear door pull handle cap
4. Rear door delta inner cover
5. Rear door delta moulding
6. Rear door panel
7. Rear door belt inside weatherstrip
8. Rear door belt out ...