Kia Cee'd: Front Seat / Front Seat Assembly Repair procedures

Kia Cee'd JD Service Manual / Body (Interior and Exterior) / Front Seat / Front Seat Assembly Repair procedures

Replacement

1.	Remove the front seat track mounting cover (A).

After loosening the mounting bolts, remove the front seat assembly (B).

Tightening torque :

34.3 ~ 53.9 N.m (3.5 ~ 5.5 kgf.m, 25.3 ~ 39.8 lb-ft)

3.	Disconnect the airbag connector (A), power seat & seat warmer connector connector (B), seat belt buckle connector (C), seat belt remind connector (D). [Driver's] [Passenger's]

Install in the reverse order of removal.

•	SEAT MOUNTING BOLT INSTALLATION PROCEDURE

•	Set the seat into the most rearward position. Check that each slide is locked, and then tighten the front mounting bolt temporarily.

•	Set the seat into most forward position. Check that each slide is locked, and then Tighten the rear mounting bolt completely.

•	Set the seat into the most rearward position. Check the front mounting bolt completely.

•	Check that the seat operates to and fro smoothy and the locking portion locks properly.

Front Seat Assembly Components and components location

Component Location 1. Front seat assembly ...

Front Seat Shield Outer Cover Components and components location

Component Location 1. Front seat shield outer cover ...

Other information:

Kia Cee'd JD Service Manual: Components and components location
Components (1) [General Type] (5Door) 1. Roof trim 2. Sunvisor [LH] 3. Sunvisor [RH] 4. Retainer 5. Assist handle bracket Components (2) [Panoramaroof Type] (5Door) ...

Kia Cee'd JD Owners Manual: Using the smart key
Park the vehicle and stop the engine. Arm the system as described below. 1. Turn off the engine. 2. Make sure that all doors, the engine hood and tailgate are closed and latched. 3. • Lock the doors by pressing the button of the front outside door handle with the smart key in your pos ...