Kia Ceed Manuals Ceed Car Manuals
Technical Info

Kia Cee'd: Dual Clutch Transmission Control System / Gear Actuator Repair procedures

Removal
1.
Turn off the ignition switch and then disconnect the battery (-) cable.
2.
Remove the air cleaner assembly and air duct.
(Refer to Engine Mechanical System - "Air cleaner")
3.
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
4.
Remove the ECM.
(Refer to Fuel System - "Engine Control Module (ECM)")
5.
Place the shift lever in the N position.
6.
Disconnect the shift actuator connector (A) and select actuator connector (B), and then remove the wire fixing clip.

7.
Loosen the mounting bolt, and then remove the gear actuator (A).
Tightening torque:
19.6 ~ 26.5 N.m (2.0 ~ 2.7 kgf.m, 14.5 ~ 19.5 lb-ft)

Installation
1.
Install in the reverse order of removal.
  
Make sure that no debris falls into the hole (A).

Check the angle of the gear actuator finger (A), and also check whether the transmission lever is in the N position.

Gear Actuator Components and components location
Component Location   1. Gear actuator 2. Dual Clutch Transmission (DCT) ...
Dual Clutch System
...
Other information:

Kia Cee'd JD Owners Manual: Engine oil level warning light
The engine oil level warning light illuminates when the engine oil level should be checked. If the warning light comes on, check the engine oil level as soon as possible and add engine oil as required. Slowly pour the recommended oil little by little into a funnel. (Oil refill capacity ...

Kia Cee'd JD Owners Manual: Smart key precautions
✽ NOTICE If, for some reason, you happen to lose your smart key, you will not be able to start the engine. Tow the vehicle, if necessary, we recommend that you contact an authorized Kia dealer. A maximum of 2 smart keys can be registered to a single vehicle. If you lose a s ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts