Kia Cee'd: Engine Control System / Injector Description and operation
Kia Cee'd JD Service Manual / Fuel System / Engine Control System / Injector Description and operation
| Description |
The GDI injector is similar to a standard injector, but sprays fuel at a much
higher pressure directly into the combustion chamber and has a swirl disc to
get the fuel swirling as it exits the nozzle. This aids in atomization of the
fuel.The ECM controls both the feed circuits (high side) to feed voltage to
the injectors and the ground circuits (low side) to energize the injectors.
Also, the feed for 2 injectors comes from the same driver set. As the ignition
coils are paired with cylinders (1-4 and 2-3), the injectors are also set up
in pairs.
Accelerator Position Sensor (APS) Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Turn the ignition switch ON.
3.
Measur ...
Injector Specifications
Specification
Item
Specification
Coil Resistance (Ω)
1.5 ± 5％[20°C(68°F)]
...
Other information:
Kia Cee'd JD Owners Manual: Hill-start assist control (HAC)
A vehicle has the tendency to slip back
on a steep hill when it starts to go after
stopping. The Hill-start Assist Control
(HAC) prevents the vehicle from slipping
back by operating the brakes automatically
for about 1~2 seconds. The brakes
are released when the accelerator pedal
is de ...
Kia Cee'd JD Service Manual: Components and components location
Component Location
※ Parking assist control unit
function and buzzer are built in BCM (Body Control Module)
...