Kia Cee'd: Dual Clutch Transmission Control System / Input Speed Sensor 2 Repair procedures
Kia Cee'd JD Service Manual / Dual Clutch Transmission(DCT) System / Dual Clutch Transmission Control System / Input Speed Sensor 2 Repair procedures
| Inspection |
Refer to DTC code "P2765, P2766" Input Shaft Speed Sensor.
| Removal |
| 1. |
Turn off the ignition switch and then disconnect the battery (-) cable.
|
| 2. |
Remove the under cover.
|
| 3. |
Disconnect the input shaft speed sensor connector (A).
|
| 4. |
Loosen the mounting bolt and then remove the input shaft speed sensor
(B).
|
| Installation |
| 1. |
Install in the reverse order of removal.
|
Input Speed Sensor 2 Schematic diagrams
Schematic Diagrams
...
Inhibitor Switch Description and operation
Description
The inhibitor switch is mounted on the transmission case. It includes the electric
switch plate circuit and is directly connected with the transmission lever via
tran ...
Other information:
Kia Cee'd JD Service Manual: Specifications
Specifications
Item
Specification
Power source
DC 14.4V (-) ground
Frequency range / Channel space
FM : 87.5 ~ 108 MHz / 50 KHz
AM : 522 ~ 1620 KHz / 9 KHz
Tuning type
...
Kia Cee'd JD Owners Manual: Manual transaxle shift indicator
This indicator informs you which gear is
desired while driving to save fuel.
For example
: Indicates that shifting up to
the 3rd
gear is desired (currently the shift
lever is in the 2nd or 1st gear).
: Indicates that shifting down to
the
3rd gear is desired (currently the
shift le ...