Kia Cee'd: Dual Clutch Transmission Control System / Inhibitor Switch Description and operation

The inhibitor switch is mounted on the transmission case. It includes the electric switch plate circuit and is directly connected with the transmission lever via transmission cable.

When the driver shifts the transmission lever, the contact point on the switch plate varies and the electric current process changes, and engages the gear intended by the driver.

In addition, the inhibitor switch cuts off power from the circuit to prevent the motor from running if the driver attempts to start the engine from any gear positions other than P or N.

Input Speed Sensor 2 Repair procedures

Inspection Refer to DTC code "P2765, P2766" Input Shaft Speed Sensor. Removal 1. Turn off the ignition switch and then disconnect the batte ...

Inhibitor Switch Specifications

Specification ▷ Type: Single signal output type ▷ Specifications   Item Specifications Output type Combined sign ...

Other information:

Kia Cee'd JD Service Manual: Troubleshooting
Troubleshooting   Symptom Possible cause Remedy Tachometer does not operate Memory2 fuse (10A) blown Check for short and replace fuse CAN line faulty Check the EMS ...

Kia Cee'd JD Service Manual: Control Cable Repair procedures
Removal 1. Move the shift lever to 4th gear. 2. Remove the air duct and the air cleaner assembly. (Refer to Engine Mechanical System - "Air Cleaner") 3. Remove the battery and battery tr ...