Kia Cee'd: Engine Control System / ISG (Idle Stop & Go) Repair procedures
Kia Cee'd JD Service Manual / Fuel System / Engine Control System / ISG (Idle Stop & Go) Repair procedures
| Inspection |
| 1. |
Remove the ISG switch from the switch assembly.
|
| 2. |
Check the continuity between the switch 3 and 6 terminals as the ISG
OFF switch is engaged.
|
| Removal |
| 1. |
Turn the ignition switch OFF and disconnect the battery negative (-)
cable.
|
| 2. |
Remove the crash pad low switch assembly (A) from the switch panel on
the crach pad of the driver's side.
|
| Installation |
| 1. |
Installation is reserve of removal.
|
ISG (Idle Stop & Go) Description and operation
Description
Idle Stop & Go (ISG) system switches off the ignition when vehicle is stopped,
and then restarts the ignition and starts the vehicle when accelerator is pushed.
I ...
ISG (Idle Stop & Go) Schematic diagrams
Schematic Diagram
1. C-CAN
High/Low
2. MIL. Lamp
3. Immobilizer
4. Canister
5. Manifold Absolute Pressure Sensor (MAPS)
6. Intake Air Temperat ...
Other information:
Kia Cee'd JD Owners Manual: Electric chromic mirror (ECM)
The electric rearview mirror automatically
controls the glare from the headlights
of the car behind you in nighttime or low
light driving conditions. The sensor
mounted in the mirror senses the light
level around the vehicle, and automatically
controls the headlight glare from
vehicles ...
Kia Cee'd JD Service Manual: Heater Core Repair procedures
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the heater & blower assembly.
(Refer to Heater - "Heater Unit")
3.
Remove the heater core cover (A) after loos ...