Kia Cee'd: Heater / Heater Core Repair procedures
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the heater & blower assembly.
(Refer to Heater - "Heater Unit")
|
3. |
Remove the heater core cover (A) after loosening the mounting screws.
|
4. |
Pull out the heater core (A) from heater unit.
|
5. |
Installation is the reverse order of removal.
• |
If you're installing a new evaporator, add refrigerant oil (PAG
OIL).
|
• |
Replace the O-rings with new ones at each fitting, and apply
a thin coat of refrigerant oil before installing them. Be sure
to use the right O-rings for R-134a or R-1234yf to avoid leakage.
|
• |
Immediately after using the oil, replace the cap on the container,
and seal it to avoid moisture absorption.
|
• |
Do not spill the refrigerant oil on the vehicle; it may damage
the paint; if the refrigerant oil contacts the paint, wash it
off immediately
|
• |
Apply sealant to the grommets.
|
• |
Make sure that there is no air leakage.
|
• |
Charge the system and test its performance.
|
• |
Do not interchange the inlet and outlet heater hoses and install
the hose clamps securely.
|
• |
Refill the cooling system with engine coolant
|
|
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Recover the refrigerant with a recovery/recycling/charging station.
...
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the heater & blower assembly.
(Refer to Heater - &q ...
Other information:
Kia Cee'd JD Service Manual: Crash Pad Lower Panel Repair procedures
Replacement
•
When prying with a flat-tip screwdriver, wrap it with protective
tape, and apply protective tape around the related parts, to
prevent damage.
...
Kia Cee'd JD Owners Manual: Fabric seat cover
Please clean the fabric seats regularly
with a vacuum cleaner in consideration of
fabric material characteristics. If they are
heavily soiled with beverage stains, etc.,
use a suitable interior cleaner. To prevent
damage to seat covers, wipe off the seat
covers down to the seams with a l ...