Kia Cee'd: Crash Pad / Crash Pad Lower Panel Repair procedures

Replacement

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Put on gloves to protect your hands.

•	Take care not to scratch the body surface.

1.	Using a screwdriver or remover, remove the crash pad side cover [LH] (A).

2.	After loosening the mounting screws, then remove the crash pad lower panel (A).

3.	Disconnect the diagnosis connector (A) and crash pad lower switch connector (B).

Install in the reverse order of removal.

•	Make sure the connector are connected in properly.

•	Replace any damaged clips.

Component Location 1. Crash pad lower panel ...

Replacement • When prying with a flat-tip screwdriver, wrap it with protective ...

Kia Cee'd JD Service Manual: Tail Gate Assembly Repair procedures
Replacement • Wear gloves to protect hands from injury. • ...

Kia Cee'd JD Service Manual: Gear Actuator Motor Repair procedures
Inspection 1. Turn off the ignition switch. 2. Disconnect the shift actuator connector (A) and select actuator connector (B). 3. Measure the resistance on the gear actuator motor terminal. ...