Kia Cee'd: Tail Gate / Tail Gate Assembly Repair procedures
Kia Cee'd JD Service Manual / Body (Interior and Exterior) / Tail Gate / Tail Gate Assembly Repair procedures
Replacement |
|
|
1. |
Remove the tail gate upper trim.
(Refer to Tail Gate - "Tail Gate Trim")
|
2. |
Remove the tail gate trim.
(Refer to Tail Gate - "Tail Gate Trim")
|
3. |
Remove the tail gate side trim.
(Refer to Tail Gate - "Tail Gate Trim")
|
4. |
Disconnect the washer nozzle hose (A) and high mounted stop lamp connector
(B).
|
5. |
Disconnect the connectors and tail gate wiring harness (B).
|
6. |
After loosening the mounting bolts, then remove the tail gate assembly
(A).
|
7. |
Using a screwdriver, lift the socket clips (A) up slightly on both ends
of the tail gate lifter (B).
|
8. |
Install in the reverse order of removal.
|
Tail Gate Assembly Components and components location
Component Location 1. Tail gate assembly ...Tail Gate Trim Components and components location
Component Location 1. Tail gate trim ...Other information:
Kia Cee'd JD Owners Manual: Front light replacement
(1) Front turn signal light
(2) Headlight (Low)
(3) Static bending light (if equipped)
(4) Position light
(5) Position light / Daytime running light
(DRL, LED Type) (if equipped)
(6) Headlight (High)
(7) Daytime running light (DRL, Bulb type)
(if equipped)
(8) Front fog light (if equipp ...
Kia Cee'd JD Owners Manual: Washer fluid
Checking the washer fluid level
Check the fluid level in the washer fluid
reservoir and add fluid if necessary.
Plain water may be used if washer fluid is
not available. However, use washer solvent
with antifreeze characteristics in
cold climates to prevent freezing.
WARNING - Coolant
...