Kia Cee'd: Heating,Ventilation, Air Conditioning / Heater
- Heater Unit Components and components location
- Heater Unit Repair procedures
- Heater Core Repair procedures
- Evaporator Core Repair procedures
- Temperature Control Actuator Description and operation
- Temperature Control Actuator Repair procedures
- Mode Control Actuator Description and operation
- Mode Control Actuator Repair procedures
- PTC Heater (Diesel Engine) Description and operation
- PTC Heater (Diesel Engine) Repair procedures
- PTC Heater (Gasoline Engine) Description and operation
- PTC Heater (Gasoline Engine) Repair procedures
Cluster Ionizer Repair procedures
Inspection
1.
Press the VENT switch more then 4 times within 2 seconds while pressing
the OFF switch.
Display
F ...
Heater Unit Components and components location
Component Location
Components
1. Heat Case (Left)
2. Heat Case (Right)
3. Separator
4. Defog Door
5. Vent Door
6. Vent Guide
...
Other information:
Kia Cee'd JD Owners Manual: Auto stop indicator
This indicator will illuminate when the
engine enters the Idle Stop mode of the
ISG (Idle Stop and Go) system.
When the automatic starting occurrs, the
auto stop indicator on the cluster will
blink for 5 seconds.
For more details, refer to the ISG (Idle
Stop and Go) system in chapter 5 ...
Kia Cee'd JD Service Manual: Specifications
Specifications
SPAS unit
Power
IGN1
Operating voltage
9V ~ 16V
SPAS sensor (Front/Rear)
Number of sensors
4EA (Front), 4EA (Rear)
Operation voltage
...