Kia Cee'd: Heater / Temperature Control Actuator Description and operation

The heater unit includes mode control actuator and temperature control actuator.

The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. Signal from the control unit adjusts the position of the temperature door by operating temperature switch and then temperature will be regulated by the hot/cold air ratio decided by the position of tne temperature door.

Evaporator Core Repair procedures

Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the heater & blower assembly. (Refer to Heater - &q ...

Temperature Control Actuator Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the temperature control actuator connector. 3. ...

Other information:

Kia Cee'd JD Owners Manual: To set cruise control speed
1. Move the lever down () on the steering wheel, to turn the system on. The cruise indicator light will illuminate. 2. Accelerate to the desired speed, which must be more than 30 km/h (20 mph). ✽ NOTICE - Manual transaxle For manual transaxle vehicles, you should depress the brake ped ...

Kia Cee'd JD Owners Manual: FM reception
AM and FM radio signals are broadcast from transmitter towers located around your city. They are intercepted by the radio antenna on your vehicle. This signal is then received by the radio and sent to your vehicle speakers. When a strong radio signal has reached your vehicle, the pr ...