Kia Cee'd: Lighting / Lighting control
The light switch has a Headlight and a Parking light position.
To operate the lights, turn the knob at the end of the control lever to one of the following positions:
(1) OFF position
(2) Position light position
(3) Headlight position
(4) Auto light position (if equipped)
- Position light position
- Headlight position
- Auto light/AFLS position
- High - beam operation
- Flashing headlights
Static bending light
While driving the corner, for your sight
and safety, the static bending light turns
on automatically. The system will operate
automatically as follows:
When vehicle speed is under 10km/h
...
Position light position
When the light switch is in the position
light position, the tail, position, license
and instrument panel lights are ON. ...
Other information:
Kia Cee'd JD Service Manual: Compressor Repair procedures
Removal
1.
If the compressor is marginally operable, run the engine at idle speed,
and let the air conditioning work for a few minutes, then shut the engine
off.
2.
Disconnect the negative cable from the battery.
...
Kia Cee'd JD Owners Manual: Checking tire inflation pressure
Check your tires once a month or
more.
Also, check the tire pressure of the
spare tire.
How to check
Use a good quality gauge to check
tire pressure. You can not tell if your
tires are properly inflated simply by
looking at them. Radial tires may
look properly inflated even when
the ...