Kia Cee'd: Engine start/stop button position / ON
With manual transaxle
Press the engine start/stop button when the button is in the ACC position without depressing the clutch pedal.
With automatic transaxle/DCT
Press the engine start/stop button while it is in the ACC position without depressing the brake pedal.
The warning lights can be checked before the engine is started. Do not leave the engine start/stop button in the ON position for a long time. The battery may discharge, because the engine is not running.
ACC(Accessory)
With manual transaxle
Press the engine start/stop button when
the button is in the OFF position without
depressing the clutch pedal.
With automatic transaxle/DCT
Press the engine start/stop b ...
START/RUN
With manual transaxle
To start the engine, depress the clutch
pedal and brake pedal, then press the
engine start/stop button with the shift
lever in the N (Neutral) position.
With automatic ...
Other information:
Kia Cee'd JD Service Manual: Auto Defogging Sensor Description and operation
Description
The auto defogging sensor is installed on the front window glass. The sensor
judges and sends signal if moisture occurs to blow out wind for defogging. The
air conditioner control module receives signal from the sensor and restrains
moisture and eliminate defog b ...
Kia Cee'd JD Owners Manual: High - beam operation
1. Turn the light switch to the headlight
position.
2. Push the lever away from you.
The high-beam indicator will light when
the headlight high beams are switched
on.
To prevent the battery from being discharged,
do not leave the lights on for
a prolonged time while the engine ...