Kia Cee'd: Engine Control System / Rail Pressure Sensor (RPS) Description and operation

Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor element) built in the sensor converts the pressure to voltage signal. By using this signal, the ECM can control correct injection amount and timing and adjusts the fuel pressure with the fuel pressure regulator valve if the target pressure and the actual pressure calculated by the RPS output signal are different.

Heated Oxygen Sensor (HO2S) Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the HO2S connector. 3. Measure resistance betwe ...

Rail Pressure Sensor (RPS) Specifications

Specification ...

Other information:

Kia Cee'd JD Owners Manual: Vanity mirror lamp
Push the switch to turn the light on or off. : The lamp will turn on if this button is pressed. : The lamp will turn off if this button is pressed. CAUTION - Vanity mirror lamp Always have the switch in the off position when the vanity mirror lamp is not in use. If the ...

Kia Cee'd JD Owners Manual: Highway driving
Tires Adjust the tire inflation pressures to specification. Low tire inflation pressures will result in overheating and possible failure of the tires. Avoid using worn or damaged tires which may result in reduced traction or tire failure. ✽ NOTICE Never exceed the maximum tire inflatio ...