Kia Cee'd: Engine Control System / Rail Pressure Sensor (RPS) Specifications

Rail Pressure Sensor (RPS) Description and operation

Description Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor ele ...

Rail Pressure Sensor (RPS) Troubleshooting

Signal Waveform ...

Other information:

Kia Cee'd JD Owners Manual: Auto stop
To stop the engine in idle stop mode 1. Decrease the vehicle speed to less than 5 km/h (3 mph). 2. Shift into N (Neutral) position. 3. Release the clutch pedal. The engine will stop and the green AUTO STOP() indicator on the instrument cluster will illuminate. Also, a message "Auto St ...

Kia Cee'd JD Owners Manual: Rocking the vehicle
If it is necessary to rock the vehicle to free it from snow, sand, or mud, first turn the steering wheel right and left to clear the area around your front wheels. Then, shift back and forth between 1 (First) and R (Reverse) in vehicles equipped with a manual transaxle or R (Reverse) and ...