Kia Cee'd: Cylinder Block / Rear Oil Seal Repair procedures

Kia Cee'd JD Service Manual / Engine Mechanical System / Cylinder Block / Rear Oil Seal Repair procedures

Removal

1.	Remove the transaxle assembly. (Refer to Manual Transaxle System - "Manual Transaxle")

2.	MT : Remove the flywheel. (Refet to Cylinder Block - "FlyWheel")

3.	AT : Remove the drive plate. (Refet to Cylinder Block - "Drive Plate")

4.	Remove the rear oil seal(A).

Installation

Install the rear oil seal.

(1)	Apply engine oil to a new oil seal lip.

(2)	Using the SST(09231-H1100, 09231-2B200) and a hammer, tap in the oil seal until its surface is flush with the rear oil seal retainer edge.

2.	MT : Install the flywheel. (Refet to Cylinder Block - "FlyWheel")

3.	AT : Install the drive plate. (Refet to Cylinder Block - "Drive Plate")

4.	Install the transaxle assembly. (Refer to Manual Transaxle System - "Manual Transaxle")

Rear Oil Seal Components and components location

Components 1. Rear oil seal ...

Cylinder Block Components and components location

Components 1. Cylinder block 2. Ladder frame 3. Crank shaft 4. Crank shaft upper bearing 5. Crank shaft lower bearin ...

Other information:

Kia Cee'd JD Service Manual: Rear Seat Latch Components and components location
Component Location 1. Rear seat latch [LH] 2. Rear seat latch [RH] ...

Kia Cee'd JD Owners Manual: Deleting a Device
Press the key Select [Phone] Select [Paired Phone List] From the paired phone list, select the device you want to delete and press the button. ✽ NOTICE When deleting the currently connected device, the device will automatically be disconnected to proceed with the deleting pr ...