Kia Cee'd: Rear Suspension System / Rear Stabilizer Bar Repair procedures

Replacement

1.	Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported.

Remove the rear wheel and tire (A) from rear hub.

Tightening torque:

88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)

•	Be careful not to damage to the hub bolts when removing the rear wheel and tire (A).

Loosen the nut and then remove the rear stabilizer link (A) from the rear lower arm & stabilizer bar.

Tightening torque:

98.1 ~ 117.7N.m (10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)

Loosen the mounting bolt and then remove the stabilizer bar (A) from the sub frame.

Tightening torque:

44.1 ~ 53.9N.m(4.5 ~ 5.5kgf.m, 32.5 ~ 39.8lb-ft)

5.	Install in the reverse order of removal.

Inspection

1.	Check the rear stabilizer bar for deformation.

2.	Check the rear stabilizer link ball joint for damage.

Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the rear wh ...

Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the rear wh ...

Kia Cee'd JD Service Manual: Spark Plug Specifications
Specification Item Specification Type SILZKR6810 Gap 0.9 ~ 1.0 mm (0.0354 ~ 0.0394 in.) ...

Kia Cee'd JD Service Manual: AVN Head Unit Repair procedures
Removal AVN Head Unit • Take care not to scratch the center fascia panel and related parts. • Ejact all the disc before rem ...