Kia Cee'd: AVN System / AVN Head Unit Repair procedures
AVN Head Unit
• |
Take care not to scratch the center fascia panel and related
parts.
|
• |
Ejact all the disc before removing the AVN head unit to prevent
damaging the CD player's load mechanism.
|
|
• |
When prying with a flat-tip screwdriver, wrap it with protective
tape, and apply protective tape around the related parts, to
prevent damage.
|
• |
Take care not to scratch the body surface.
|
• |
Put on gloves to protect your hands.
|
|
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Using a screwdriver or remover, remove the center fascia panel (A).
|
3. |
Disconnect the start/stop button connector (A).
|
4. |
Remove the ANV head unit (A) after loosening 4 screws.
|
5. |
Remove the AVN head unit connectors and cables (A).
–
|
If CD does not eject, don't try to remove it.
|
–
|
The player may be damaged.
|
–
|
Therefore, contact a service shop for repairs.
|
|
|
1. |
Connect the AVN head unit connectors and cables.
|
2. |
Install the AVN head unit.
|
3. |
Install the center fascia panel.
|
4. |
Connect the negative (-) battery terminal.
Make sure the AVN Head unit connectors are plugged in properly
and the antenna cable is connected properly.
|
|
Components
Connector Pin Information
No.
Connector A
Connector B
Connector C
1
Rear left spe ...