Kia Ceed Manuals Ceed Car Manuals
Technical Info

Kia Cee'd: Rear Suspension System / Rear Upper Arm Repair procedures

Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the rear wheel and tire (A) from rear hub.
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)

  
Be careful not to damage to the hub bolts when removing the rear wheel and tire (A).
3.
Loosen the bolt & nut and then remove the rear upper arm (A) from the rear axle.
Tightening torque:
137.3 ~ 156.9N.m(14.0 ~ 16.0kgf.m, 101.3 ~ 115.7lb-ft)

4.
Loosen the bolt & nut and then remove the rear upper arm (A) from the sub frame.
Tightening torque:
156.9 ~ 176.5N.m(16.0 ~ 18.0kgf.m, 115.7 ~ 130.2lb-ft)

5.
Install in the reverse order of removal.
6.
Check the wheel alignment.
Inspection
1.
Check the bushing for wear and deterioration.
2.
Check the rear lower arm for deformation.
3.
Check the coil spring and spring pad for deterioration and deformation.
4.
Check for all bolts and nut.
Rear Shock Absorber Repair procedures
Replacement 1. Loosen the wheel nuts slightly.Raise the vehicle, and make sure it is securely supported. 2. Remove the rear wheel a ...
Rear Lower Arm Repair procedures
Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the rear wh ...
Other information:

Kia Cee'd JD Service Manual: ESP Control Module Components and components location
Components   1. Front - left tube 2. Rear - right tube 3. Rear - left tube 4. Front - right tube 5. MC2 6. MC1 7. ESP control module(HECU) 8. Damper 9. Bracket ...

Kia Cee'd JD Service Manual: Hazard Lamp Switch Repair procedures
Inspection 1. It will be able to diagnose defects of hazard switch with GDS quickly. GDS can operates actuator forcefully, input/output value monitoring and self diagnosis. 2. Select model and "BCM". ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts