Kia Cee'd: ABS(Anti-Lock Brake System) / Rear Wheel Speed Sensor Repair procedures

Kia Cee'd JD Service Manual / Brake System / ABS(Anti-Lock Brake System) / Rear Wheel Speed Sensor Repair procedures

Removal

Remove the rear wheel and tire.

Tightening torque:

88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)

Remove the rear wheel speed sensor mounting bolt (A).

Tightening torque:

6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)

3.	Remove the rear wheel speed sensor cable mounting bolt.

4.	Remove the rear wheel house trim. (Refer to Body - "Rear wheel house trim")

5.	Disconnect the rear wheel speed sensor connector (A), and than remove the rear wheel speed sensor.

Install in the reverse order of removal.

Install the rear sensor after lubricating the O-ring of sensor with the assembly fluid(RAREMAX AF-1)

When inserting the sensor, take care the O-ring not to be damaged.

Rear Wheel Speed Sensor Components and components location

Components 1. Rear wheel speed sensor 2. Rear wheel speed sensor connector ...

ESP(Electronic Stability Program) System

...

Other information:

Kia Cee'd JD Service Manual: Repair procedures
General Inspection After or before servicing the EPS system, perform the troubleshooting and test procedure as follows. Compare the system condition with normal condition in the table below and if abnormal symptom is detected, perform necessary remedy and inspection. &nb ...

Kia Cee'd JD Service Manual: Cluster Fascia Panel Repair procedures
Replacement • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. ...