Kia Cee'd: Keyless Entry and Burglar Alarm / Repair procedures
| Inspection |
| 1. |
Remove the front door trim.
(Refer to Body - "Front Door Trim")
|
| 2. |
Remove the front door module.
(Refer to Body - "Front Door Module")
|
| 3. |
Disconnect the connector from the actuator.
|
| 4. |
Check actuator operation by connecting power and ground according to
the table. To prevent damage to the actuator, apply battery voltage
only momentarily.
[Central Lock]
[Dead Lock]
|
| 5. |
Check for continuity between the terminals in each switch position according
to the table.
[Central Lock]
|
| 1. |
Remove the rear door trim.
(Refer to Body - "Rear Door Trim")
|
| 2. |
Remove the rear door module.
(Refer to Body - "Rear Door Module")
|
| 3. |
Disconnect the connector from the actuator.
|
| 4. |
Check actuator operation by connecting power and ground according to
the table. To prevent damage to the actuator, apply battery voltage
only momentarily.
[Central Lock]
[Dead Lock]
|
| 5. |
Check for continuity between the terminals in each switch position according
to the table.
[Central / Dead Lock]
|
| 1. |
Remove the tailgate trim.
(Refer to Body - "Tailgate Trim")
|
| 2. |
Disconnect the connector from the actuator.
|
| 3. |
Check actuator operation by connecting power and ground according to
the table. To prevent damage to the actuator, apply battery voltage
only momentarily.
|
| 1. |
Remove the tailgate open switch bracket (A) after loosening screws.
|
| 2. |
Remove the switch and disconnect the connector from the switch.
|
| 3. |
Check for continuity between the terminals in each switch position according
to the table.
|
| 1. |
Disconnect the connector from the hood switch (A).
|
| 2. |
Check for continuity between the terminals and ground according to the
table.
|
| 1. |
Remove the burglar horn (A) after removing 1 bolt and disconnect the
connector from the burglar horn.
|
| 2. |
Test the burglar horn by connecting battery power to the terminal 1
and ground the terminal 2.
|
| 3. |
The burglar horn should make a sound. If the burglar horn fails to make
a sound replace it.
|
Description and operation
Description
Burglar Alarm State [B/A State]
B/A State
Description
DISARM
1)
In "DISARM ...
Transmitter Specifications
Specification
Item
Description
Power source
3V
Operating temperature
-20°C ~ +60°C (-4°F ~ ...
Other information:
Kia Cee'd JD Service Manual: Components and components location
Components Location
1. Fuel tank
2. Fuel pump
3. Fuel filter
4. Fuel pressure regulator
5. Canister
6. Fuel filler hose
7. Leveling hose
8. Ventilation hose (Canister ↔ Atmosphere)
9. Vapor tube (Canister ↔ Intake manifold)
...
Kia Cee'd JD Owners Manual: Side impact air bag
Your vehicle is equipped with a side
impact air bag in each front seat. The
purpose of the air bag is to provide the
vehicle's driver and/or the front passenger
with additional protection than that
offered by the seat belt alone. The side
impact air bags are designed to deploy
only ...