Kia Cee'd: IMS (Integrated Memory) / Schematic diagrams

Kia Cee'd JD Service Manual / Body Electrical System / IMS (Integrated Memory) / Schematic diagrams

Circuit Diagram

Input/Output Specification

Connector Pin Lay Out

IMS input/output pin information

No	Signal Name	I/O	Contents	Remark
A1	-	-	-
A2	Front height motor up	O	Front height motor up output
A3	Rear height motor up	O	Rear height motor up output
A4	Recline motor front	O	Recline motor front output
A5	Slide motor front	O	Slide motor front output
A6	-	-	-
A7	Front height motor down	O	Front height motor down output
A8	-	-	-
A9	-	-	-
A10	Rear height motor down	O	Rear height motor down output
A11	Recline motor rear	O	Recline motor rear output
A12	Slide motor rear	O	Slide motor rear output
B1	B+(Power)	I	Power B+ for operating motor
B2	GND(Power)	I	Power GND for operating motor
B3	B+(Power)	I	Power B+ for operating motor
B4	GND (Power)	I	Power GND for operating motor
B5	B+(Power)	I	Power B+ for operating motor
C1	-	-	-
C2	-	-	-
C3	Slide front manual switch	I	Slide front manual switch input	On : GND
C4	Recline front manual switch	I	Recline front manual switch input	On : GND
C5	Front height up manual switch	I	Front height up manual switch input	On : GND
C6	Rear height up manual switch	I	Rear height up manual switch input	On : GND
C7	Slide motor sensor	I	Slide motor sensor input	Pulse signal
C8	Front height motor sensor	I	Front height input motor sensor	Pulse signal
C9	Front height motor sensor	I	Front height motor sensor input	Pulse signal
C10	Sensor Vcc(Seat)	O	VCC for operating sensor	5V
C11	-	-	-
C12	-	-	-
C13	Slide rear manual switch	I	Slide rear manual switch input	ON : GND
C14	Recline rear manual switch	I	Recline rear manual switch input	ON : GND
C15	Front height down manual switch	I	Front height down manual switch input	ON : GND
C16	Rear height down manual switch	I	Rear height down manual switch input	ON : GND
C17	-	-	-
C18	-	-	-
C19	-	-	-
C20	-	-	-
D1	-	-	-
D2	Rear height sensor	I	Rear height motor sensor	Pulse signal
D3	-	-	-
D4	CAN High	I/O	CAN
D5	CAN Low	I/O	CAN
D6	-	-	-
D7	IGN1	I	IGN1 input	BAT
D8	B+(ECU)	I	ECU power input	BAT
D9	GND(ECU)	I	ECU GND
D10	-	-	-
D11	Switch1	I	Switch input
D12	Switch2	I	Switch input
D13	-	-	-
D14	SET switch	I	Switch input
D15	-	-
D16	-	-

Communication System

Components and components location

Component Location 1. Seat Memory Unit (IMS) 2. IMS control switch 3. IMS driver power seat control ...

Description and operation

Description system outline An optimal seat position set by a driver can be memorized in Power seat unit by IMS SW, which enables restoration of seat position set by the ...

Other information:

Kia Cee'd JD Service Manual: Sunvisor Repair procedures
Replacement • Put on gloves to protect your hands. • Use ...

Kia Cee'd JD Owners Manual: Immobilizer indicator
Without smart key system This indicator illuminates when the immobilizer key is inserted and turned to the ON position to start the engine. At this time, you can start the engine.The indicator goes out after the engine is running. If this indicator blinks when the ignition switch is in ...