Kia Cee'd: Starting the engine / Starting the gasoline engine
1.Carry the smart key or leave it inside the vehicle.
2.Make sure the parking brake is firmly applied.
3.Manual Transaxle - Depress the clutch pedal fully and shift the transaxle into Neutral. Keep the clutch pedal and brake pedal depressed while starting the engine.
Automatic transaxle/DCT* - Place the transaxle shift lever in P (Park).
Depress the brake pedal fully.
You can also start the engine when the shift lever is in the N (Neutral) position.
* DCT : Dual clutch transmission
4.Press the engine start/stop button. It should be started without depressing the accelerator.
5.Do not wait for the engine to warm up while the vehicle remains stationary. Start driving at moderate engine speeds. (Steep accelerating and decelerating should be avoided.)
Starting the engine
WARNING
Always wear appropriate shoes
when operating your vehicle.
Unsuitable shoes (high heels, ski
boots,etc.) may interfere with
your ability to use the brake and
accelerator ped ...
Starting the diesel engine
To start the diesel engine when the
engine is cold, it has to be pre-heated
before starting the engine and then have
to be warmed up before starting to drive.
1.Make sure the parking brake is
...
Other information:
Kia Cee'd JD Service Manual: Water pump Troubleshooting
Troubleshooting
Symptoms
Possible Causes
Remedy
Coolant leakage
•
From the bleed hole of the water pump
Visually check
•
...
Kia Cee'd JD Service Manual: Repair procedures
Dual Clutch Transmission(DCT)
Learning
1.
Learning overview and purpose
–
Checks gear shift precision and normal clutch operation in the
finished car to ensure accurate Dual Clutch Transmission (DCT)
control by th ...