Kia Ceed Manuals Ceed Car Manuals
Technical Info

Kia Cee'd: Starting the engine / Starting the diesel engine

To start the diesel engine when the engine is cold, it has to be pre-heated before starting the engine and then have to be warmed up before starting to drive.

1.Make sure the parking brake is applied.

2.Manual Transaxle - Depress the clutch pedal fully and shift the transaxle into Neutral. Keep the clutch pedal and brake pedal depressed while pressing the engine start/stop button to the START position.

Automatic Transaxle / DCT* - Place the transaxle shift lever in P (Park). Depress the brake pedal fully.

You can also start the engine when the shift lever is in the N (Neutral) position.

3. Press the engine start/stop button while depressing the brake pedal.

4. Continue depressing the brake pedal until the illuminated glow indicator goes off. (approximately 5 seconds)

5. The engine starts running when the glow indicator goes off.

✽ NOTICE

If the engine start/stop button is pressed once more while the engine is pre-heating, the engine may start.

Starting and stopping the engine for turbocharger intercooler

1. Do not race or accelerate the engine immediately after starting.

If the engine is cold, idle for several seconds before sufficient lubrication is ensured in the turbocharger unit.

2. After high speed or extended driving, requiring a heavy engine load, idle the engine about 1 minute before turning it off.

This idle time will allow the turbocharger to cool prior to shutting the engine off.

CAUTION

Do not turn the engine off immediately after it has been subjected to a heavy load. Doing so may cause severe damage to the engine or turbocharger unit.

WARNING

The engine will start, only when the smart key is in the vehicle.

Never allow children or any person who is unfamiliar with the vehicle touch the engine start/stop button or related parts.

CAUTION

If the engine stalls while the vehicle is in motion, do not attempt to move the shift lever to the P (Park) position. If the traffic and road conditions permit, you may put the shift lever in the N (Neutral) position while the vehicle is still moving and press the engine start/stop button in an attempt to restart the engine.

✽ NOTICE

CAUTION

Do not press the engine start/stop button for more than 10 seconds except when the stop lamp fuse is blown.

Starting the gasoline engine
1.Carry the smart key or leave it inside the vehicle. 2.Make sure the parking brake is firmly applied. 3.Manual Transaxle - Depress the clutch pedal fully and shift the transaxle into Neutra ...
ISG (Idle Stop and Go) system
Your vehicle may be equipped with the ISG system, which reduces fuel consumption by automatically shutting down the engine, when the vehicle is at a standstill. (For example : red light, stop ...
Other information:

Kia Cee'd JD Owners Manual: Interior light
When the interior light switch is in the DOOR position and all doors (and tailgate) are locked and closed, the room lamp will come on for 30 seconds if any of the below is performed. Without smart key system - When the door unlock button is pressed on the transmitter. With the sma ...

Kia Cee'd JD Service Manual: Camshaft Components and components location
Components   1. Exhaust camshaft 2. Intake camshaft 3. Camshaft bearing cap 4. Camshaft front bearing cap 5. OCV (Oil Control Valve) adapter 6. O-ring B 7. O-ring A ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts