Kia Cee'd: Rear Suspension System / Trailing Arm Repair procedures

Kia Cee'd JD Service Manual / Suspension System / Rear Suspension System / Trailing Arm Repair procedures

Replacement

1.	Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported.

Remove the rear wheel and tire (A) from rear hub.

Tightening torque:

88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)

•	Be careful not to damage to the hub bolts when removing the rear wheel and tire (A).

3.	Disconnent the parking brake cable. (Refer to Brake System - "Rear Disc Brake")

Loosen the bolt (B,C) & nut (D) and then remove the rear trailing arm (A) from the rear axle.

Tightening torque:

(B) 98.1 ~ 117.7N.m(10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)

(D) 44.1 ~ 53.9N.m(4.5 ~ 5.5kgf.m, 32.5 ~ 39.8lb-ft)

5.	Install in the reverse order of removal.

Rear Assist Arm Repair procedures

Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the rear wh ...

Rear Cross Member Repair procedures

Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the rear wh ...

Other information:

Kia Cee'd JD Service Manual: Emergency Call (eCall) Unit Repair procedures
Removal Carry out the Test Mode in the following cases. – Replacing the eCall unit – Replacing the Back-up Battery (BUB) ...

Kia Cee'd JD Owners Manual: To remove the cargo security screen
1. Push the guide pin inward. 2. While pushing the guide pin, pull out the cargo security screen. WARNING Do not place objects on the cargo security screen. Such objects may be thrown about inside the vehicle and possibly injure vehicle occupants during an accident or when b ...