Kia Cee'd: Manual Transaxle System / Troubleshooting
Kia Cee'd JD Service Manual / Manual Transaxle System / Troubleshooting
| Troubleshooting |
|
Trouble symptom |
Suspect area |
Remedy |
|
Abnormal noise |
Oil level (Low) |
To adding oil after inspect the parts. (oil seal, drain plug, filler plug)
|
|
Oil (Wrong or contaminated) |
Replace the oil. |
|
|
Transaxle and engine mounting state (Wrong) |
Tighten the mounting bolt with specified torque. |
|
|
Shaft end play (Wrong) |
Adjust the end play. |
|
|
Synchronizer ring (Worn or damaged) |
Replace the synchronizer ring. |
|
|
Gear (Worn or damaged) |
Replace the gear. |
|
|
Bearing (Worn or damaged) |
Replace the bearing. |
|
|
Oil leak |
Oil level (High) |
Inspect the oil level. |
|
Gasket (Damaged) |
Replace the gasket. (drain plug, filler plug) |
|
|
Oil seal (Worn or damaged) |
Replace the oil seal. |
|
|
Hard shifting or impossible to shift |
Oil (Wrong) |
Replace the oil. |
|
Shift fork (Worn) |
Replace the shift fork. |
|
|
Synchronizer ring (Worn or damaged) |
Replace the synchronizer ring. |
|
|
Gear (Worn or damaged) |
Replace the gear. |
|
|
Hub sleeve (Worn or damaged) |
Replace the hub sleeve. |
|
|
Jumps out of gear |
Shift fork (Worn) |
Replace the shift fork. |
|
Hub sleeve (Worn or damaged) |
Replace the hub sleeve. |
|
|
Gear (Worn or damaged) |
Replace the gear. |
|
|
Bearing (Worn or damaged) |
Replace the bearing. |
Special service tools
Special Service Tools
Tool Name / Number
Illustration
Description
Engine support fixture (bar)
09200-3N000
...
Other information:
Kia Cee'd JD Owners Manual: Engine oil level warning
light
The engine oil level warning light illuminates
when the engine oil level should be
checked.
If the warning light comes on, check the
engine oil level as soon as possible and
add engine oil as required.
Slowly pour the recommended oil little by
little into a funnel. (Oil refill capacity ...
Kia Cee'd JD Owners Manual: Starting the gasoline engine
1.Make sure the parking brake is
applied.
2.Manual Transaxle - Depress the
clutch pedal fully and shift the
transaxle into Neutral. Keep the clutch
pedal and brake pedal depressed
while turning the ignition switch to the
start position.
Automatic Transaxle/DCT* - Place
the transaxle ...