Kia Ceed Manuals Ceed Car Manuals
Technical Info

Kia Cee'd: Engine Control System / Variable Intake Solenoid (VIS) Valve Repair procedures

Kia Cee'd JD Service Manual / Fuel System / Engine Control System / Variable Intake Solenoid (VIS) Valve Repair procedures

Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the VIS valve connector.
3.
Measure resistance between VIS valve terminals 1 and 2.
Specification: Refer to "Specification"
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Disconnect the variable intake solenoid valve connector (A).
3.
Disconnect the vacuum hoses (B) from the valve.
4.
Remove the installation bolt, and then remove the valve (C) from the surge tank.

Installation
  
Install the component with the specified torques.
Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.
  
Use care to keep foreign material out of the valve.
1.
Installation is reverse of removal.
Variable Intake Solenoid (VIS) Valve Schematic diagrams
Circuit Diagram ...
Fuel Pressure Control Valve Description and operation
Description Fuel Pressure Regulator Valve is installed on the high pressure fuel pump and controls fuel flow flowing into the injectors in accordance with the ECM signal calculat ...
Other information:

Kia Cee'd JD Service Manual: Front Seat Belt Buckle Repair procedures
Replacement 1. Remove the front seat assembly. (Refer to Front Seat - "Front Seat Assembly") 2. Disconnect the front seat belt buckle connector wiring (A). 3. After loosening the ...

Kia Cee'd JD Service Manual: Components and components location
Components   1. Floor console assembly 2. Console garnish [RH] 3. Console garnish [LH] 4. Console upper cover 5. Console tray 6. Portable ash tray 7. Console tray mat ...

Copyright © www.kiamanual.com 2020-2024 | Privacy Policy | Kia Car Parts