Kia Cee'd: Cooling System / Water Temperature Control Assembly Repair procedures
Kia Cee'd JD Service Manual / Engine Mechanical System / Cooling System / Water Temperature Control Assembly Repair procedures
| Removal and Installation |
| 1. |
Loosen the drain plug, and drain the engine coolant. Remove the radiator
cap to drain with speed.
|
| 2. |
Disconnect the battery negative terminal.
|
| 3. |
Remove the air cleaner assembly.
(Refer to Intake and exhaust system - "Air Cleaner")
|
| 4. |
Disconnect the water temperature sensor connector.
(Refer to Fuel System - "Engine Control System")
|
| 5. |
Disconnect the radiator upper hose.
|
| 6. |
Remove the heater hose.
|
| 7. |
Remove the water temperature control assembly (B) after disconnecting
the water hose (A).
|
| 8. |
Install in the reverse order of removal.
|
Water Temperature Control Assembly Components and components location
Components
1. Water temperature control
assembly
2. Water temperature sensor
3. Gasket
4. Water
5. Bypass hose
...
Water pump Components and components location
Components
1. Gasket
2. Water pump
3. Water pump pulley
...
Other information:
Kia Cee'd JD Owners Manual: Introduction
■ for 17 inch tire
With the Tire Mobility Kit you stay
mobile even after experiencing a tire
puncture.
The system of compressor and sealing
compound effectively and comfortably
seals most punctures in a
passenger car tire caused by nails
or similar objects and reinflates the
tire ...
Kia Cee'd JD Owners Manual: ON
With manual transaxle
Press the engine start/stop button when
the button is in the ACC position without
depressing the clutch pedal.
With automatic transaxle/DCT
Press the engine start/stop button while it
is in the ACC position without depressing
the brake pedal.
The warning lights ca ...