Kia Rio Manuals Rio Car Manuals
Technical Info

Kia Rio: Seat belts / Care of seat belts

Kia Rio 2017-2020 YB Owners Manual / Safety features of your vehicle / Seat belts / Care of seat belts

Seat belt systems should never be disassembled or modified. In addition, care should be taken to assure that seat belts and belt hardware are not damaged by seat hinges, doors or other abuse.

Periodic inspection

All seat belts should be inspected periodically for wear or damage of any kind. Any damaged parts should be replaced as soon as possible.

Keep belts clean and dry

Seat belts should be kept clean and dry. If belts become dirty, they can be cleaned by using a mild soap solution and warm water. Bleach, dye, strong detergents or abrasives should not be used because they may damage and weaken the fabric.

When to replace seat belts

The entire in-use seat belt assembly or assemblies should be replaced if the vehicle has been involved in an accident. This should be done even if no damage is visible. Additional questions concerning seat belt operation should be directed to an authorized Kia dealer.

WARNING - Pinched Seat belts

Make sure that the webbing and/or buckle does not get caught or pinched in the rear seat when returning the rear seatback to its upright position. A caught or pinched webbing/buckle may become damaged and could fail during a collision or sudden stop.

WARNING

Seatbelts can become hot in a closed vehicle on a sunny day. They could burn occupants, including infants and children.

Seat belt precautions
Infant or small child You should be aware of the specific requirements in your country. Child and/or infant seats must be properly placed and installed in the rear seat. For more information abou ...
Child Restraint System (CRS)
Children under age 13 must always ride in the rear seats and must always be properly restrained to minimize the risk of injury in an accident, sudden stop or sudden maneuver. According to accident ...
Other information:

Kia Rio 2017-2020 YB Service Manual: Headlamp Leveling System


Components and components location Component Location 1. Headlamp assembly (Built in leveling actuator) 2. Headlamp leveling switch ...

Kia Rio 2017-2020 YB Service Manual: Output Speed Sensor


Specifications Specification Item Specification Type Hall effect sensor Current 22 mA (Max) Output voltage High : 4.8 V - 5.2 V Low : Below 0.8 ...
Copyright © www.kiamanual.com 2020-2021