Kia Rio Manuals Rio Car Manuals
Technical Info

Kia Rio: Driving your vehicle / Economical operation

Kia Rio 2017-2020 YB Owners Manual / Driving your vehicle / Economical operation

Your vehicle's fuel economy depends mainly on your style of driving, where you drive and when you drive.

Each of these factors affects how many miles (kilometers) you can get from a gallon (liter) of fuel.To operate your vehicle as economically as possible, use the following driving suggestions to help save money in both fuel and repairs:

Keeping a vehicle in good operating condition is important both for economy and safety. Therefore, have an authorized Kia dealer perform scheduled inspections and maintenance.

WARNING - Engine off during motion

Never turn the engine off to coast down hills or anytime the vehicle is in motion. The power steering and power brakes will not function properly without the engine running. In addition, turning off the ignition while driving could engage the steering wheel lock resulting in loss of vehicle steering. Keep the engine on and downshift to an appropriate gear for engine braking effect.

Sport mode integrated control system
SPORT mode The sport mode may be selected according to the driver’s preference or road condition. The mode changes whenever the SPORT MODE button is pressed. ❈ When normal mode is selected, ...
Special driving conditions
Hazardous driving conditions When hazardous driving conditions are encountered such as water, snow, ice, mud, sand, or similar hazards, follow these suggestions: Drive cautiously and allow extr ...
Other information:

Kia Rio 2017-2020 YB Service Manual: Exhaust Manifold


Components and components location Components 1. Exhaust manifold gasket 2. Exhaust manifold 3. Exhaust manifold stay 4. Heat protector Repair procedures Removal and Installation 1. Disconnect the negative battery ...

Kia Rio 2017-2020 YB Owners Manual: Tail lamp (inside) bulb replacement (for 5 door)


1. Open the liftgate. 2. Remove the service cover. 3. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly. 4. Remove the bulb from bulb-socket by pulling it out. 5. Insert a new bulb by inserting it in ...
Copyright © www.kiamanual.com 2020-2021