Kia Rio: Blower / Intake Actuator
Description and operation
| Description |
The intake actuator is located at the blower unit. It regulates the intake door by signal from control unit. Pressing the intake selection switch will shift between recirculation and fresh air modes.
Repair procedures
| Inspection |
| 1. |
Turn the ignition switch OFF. |
| 2. |
Disconnect the intake actuator connector. |
| 3. |
Verify that the intake actuator operates to the fresh (LHD) or recirculation (RHD) position when connecting 12V to the terminal 4 and grounding terminal 3. Verify that the intake actuator operates to the recirculation (LHD) or fresh (RHD) position when connecting in the reverse. [LHD]
[RHD]
|
| 4. |
Connect the intake actuator connector. |
| 5. |
Turn the ignition switch ON. |
| 6. |
Check the voltage between terminal 6 and 5 (LHD) or 7 (RHD). Specification
|
| 7. |
If the intake actuator is not operated well, substitute with a known-good intake actuator and check for proper operation. |
| 8. |
If the problem is corrected, replace the intake actuator. |
| Replacement |
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Remove the crash pad. (Refer to Body - "Main Crash Pad Assembly") |
| 3. |
Disconnect the connector (A) and then remove the intake actuator (B) after loosening the mounting screws.
|
| 4. |
Installation is the reverse order of removal. |
Climate Control Air Filtar
Description and operation
Description
The climate control air filter is located in the bower unit. It eliminates foreign
materials and odor. The particle filter performs a role as an ...
Controller
...
Other information:
Kia Rio 2017-2020 YB Owners Manual: Vehicle stability management (VSM)
This system is designed to provide further enhancements to vehicle stability and steering responses when a vehicle is driving on a slippery road or a vehicle detected changes in coefficient of friction between the right wheels and left wheels when braking. VSM operation When the VSM is in op ...
Kia Rio 2017-2020 YB Owners Manual: Engine compartment fuse replacement
1. Turn the ignition switch and all other switches off. 2. Remove the fuse panel cover by pressing the tab and pulling the cover up. When the blade type fuse is disconnected, remove it by using the clip designed for changing fuses located in the engine compartment fuse box. Upon removal, secu ...