Kia Rio: Manual Transaxle System / Neutral Switch
Specifications
| Specifications |
|
Item |
Specified |
|
Type |
ON / OFF |
|
Operating condition |
Neutral gear |
|
Operating voltage |
10 V - 15 V |
|
Operating temperature |
-30°C to 100°C (-30°F to 212°F) |
Components and components location
| Component Location |
1. Neutral switch
Description and operation
| Description |
| • |
Neutral switch signal is transmitted to ECM in neutral state. |
| • |
The signal is blocked when gear is changed. |
| • |
When the signal is blocked, the ECM controls the fuel injection amount mapping value for 1st gear so that vehicle can start properly.
|
Repair procedures
| Inspection |
| 1. |
Remove the air cleaner assembly. (Refer to Engine Mechanical System - "Air Cleaner) |
| 2. |
Disconnect the neutral switch connector (A).
|
| 3. |
Check the continuity between power terminal and signal terminal.
|
| Removal |
| 1. |
Remove the air cleaner assembly. (Refer to Engine Mechanical System - "Air Cleaner) |
| 2. |
Disconnect the neutral switch connector (A).
|
| 3. |
Remove the neutral switch (A).
|
| Installation |
| 1. |
Install in the reverse order of removal. |
The neutral switch must be replaced with new one. (Do not reuse it.) |
Back-up Lamp Switch
Specifications
Specifications
Item
Specified
Type
ON/OFF
Operating condition
Reverse gear
...
Automatic Transaxle System
Specifications
Specifications
Automatic Transaxle
Item
Specification
Transaxle model
A4CF1
Engine model
...
Other information:
Kia Rio 2017-2020 YB Service Manual: Quarter Garnish
Repair procedures Replacement Put on gloves to protect your hands. • Use a plastic panel removal tool to remov ...
Kia Rio 2017-2020 YB Owners Manual: Tires and wheels
Tire care For proper maintenance, safety, and maximum fuel economy, you must always maintain recommended tire inflation pressures and stay within the load limits and weight distribution recommended for your vehicle. Recommended cold tire inflation pressures All tire pressures (including the s ...