Kia Rio Manuals Rio Car Manuals
Technical Info

Kia Rio: Lubrication System / Oil Level Gauge & Pipe

Kia Rio 2017-2020 YB Service Manual / Engine Mechanical System / Lubrication System / Oil Level Gauge & Pipe
Repair procedures
Removal and Installation
1.

Remove the oil level gauge (A).

2.

Remove the intake manifold.

(Refer to Intake And Exhaust System - "Intake Manifold")

3.

Remove the oil level pipe (A).

Tightening torque:

9.8 - 11.8 N·m (1.0 - 1.2 kgf·m, 7.2 - 8.7 lb·ft)

4.

Install in the reverse order of removal.

  

Apply engine oil on the o-ring of the pipe before assembly.

Oil Pan
Components and components location Components 1. Oil screen O-ring 2. Oil screen 3. Oil pan 4. Drain plug gasket 5. Drain plug Repair proced ...
Oil Pump
Repair procedures Removal 1. Drain the engine oil. (Refer to Lubrication System - "Engine Oil") 2. Remove the timing chain. (Refer ...
Other information:

Kia Rio 2017-2020 YB Service Manual: Driver Airbag (DAB) Module and Clock Spring


Description and operation Description Driver Airbag (DAB) is installed in the steering wheel and electrically connected to SRSCM via the clock spring. It protects the driver by deploying the airbag when frontal crash occurs. The SRSCM determines deployment of the Driver Airbag (D ...

Kia Rio 2017-2020 YB Service Manual: MDPS Control Unit


Repair procedures Removal 1. Disconnect the battery negative cable. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Disconnect the MDPS EUC connector. ...
Copyright © www.kiamanual.com 2020-2021