Kia Rio: SRSCM / PAB ON/OFF Switch
Description and operation
Description |
Driver can control the passenger airbag operating Condition (Enable or Disable) by using this PAB ON/OFF switch.
Passenger Airbag (PAB) ON/OFF Switch is installed in the crash pad side cover.
Components and components location
Components |
Repair procedures
Removal |
1. |
Remove the ignition key from the vehicle. |
2. |
Disconnect the battery negative cable and wait for at least three minutes before beginning to work. |
3. |
Remove the crash pad side cover (A).
|
4. |
Disconnect the PAB ON/OFF switch connector (A).
|
5. |
Remove the PAB ON/OFF switch. |
Installation |
1. |
Remove th e ignition key from the vehicle. |
2. |
Disconnect the battery negative cable and wait for at least three minutes before beginning to work. |
3. |
Install the PAB ON/OFF switch to the crash pad side cover. |
4. |
Connect the PAB ON/OFF switch connector. |
5. |
Install the crash pad side cover. (Refer to Body - "Crash pad side cover") |
6. |
After installing the SRSCM, confirm proper system operation:
|
Seat Belt Buckle Switch (BS)
Description and operation Description The SRSCM shall monitor the status of the driver and front passenger seat belt buckle. The SRSCM provides one pin each for the driver and front pa ...Brake System
Specifications Specifications Item Specification Master cylinder Type Single Cylinder I.D. ...Other information:
Kia Rio 2017-2020 YB Owners Manual: Hood
Opening the hood 1. Pull the release lever to unlatch the hood. The hood should pop open slightly. WARNING Open the hood after turning off the engine on a flat surface, shifting the shift lever to the P (Park) position for Intelligent Variable Transmission and to the 1st (First) gear or R ( ...
Kia Rio 2017-2020 YB Service Manual: Rear Center Seat Belt Retractor
Components and components location Component Location [5 Door] 1. Rear center seat belt retractor [4 Door] 1. Rear center seat belt retractor Repair procedures Replacement ...