Kia Rio: Front Bumper / Radiator Grill
Components and components location
Repair procedures
|
Put on gloves to protect your hands.
|
| • |
Use a plastic panel removal tool to remove interior trim pieces
without marring the surface.
|
| • |
Take care not to bend or scratch the trim and panels.
|
|
| 1. |
Remove the front bumper cover.
(Refer to Front Bumper - "Front Bumper Assembly")
|
| 2. |
Remove the front bumper energy absorber (A).
|
| 3. |
Remove the front bumper grill (A).
|
| 4. |
Remove the front bumper radiator grill (A).
|
| 5. |
Install in the reverse order of removal.
| •
|
Make sure the connector is connected properly.
|
| •
|
Replace any damaged clips.
|
|
|
Components and components location
Component Location
1. Front bumper cover
Repair procedures
Replacement
&nb ...
Components and components location
Components
1. Front door trim
2. Front door panel
3. Front door rear channel & run
4. Front door belt inside weatherstrip ...
Other information:
Opening the liftgate
The liftgate is locked or unlocked when all doors are locked or unlocked
with the transmitter (or smart key) or central door lock switch.
If unlocked, the liftgate can be opened by pressing the handle and pulling
it up.
When all doors are locked, the liftgate unl ...
Depress the brake pedal.
Depress the clutch pedal with a Manual Transmission.
Shift into N (Neutral) with an Intelligent Variable Transmission.
Press the CANCEL button.
Decrease the vehicle speed lower than the memory speed by 20 km/h (12 mph
).
Decrease the vehicle speed to less t ...
Front Bumper Assembly
Front Door