Kia Rio: A/C Pressure Transducer Description

The A/C Pressure Transducer (APT) convert the pressure value of high pressure line into voltage value after measure it. By converted voltage value, engine ECU controls cooling fan by operating it high speed or low speed. Engine ECU stop the operation of compressor when the temperature of refrigerant line is so high or so low irregularly to optimize air conditioning system.

Receiver-Drier Replacement

1. Remove the condenser. 2. Remove the cap (B) on the bottom of the condenser with L wrench (A). Tightening torq ...

A/C Pressure Transducer Inspection

1. Measure the pressure of high pressure line by measuring voltage output between terminal “1” and “2”. 2. Inspect the voltage valu ...

See also:

License Lamp Installation
1. Install the bulb. 2. Connect the lens and license lamp. ...

Windshield Wiper-Washer Switch Installation
1. Install the wiper switch. 2. Install the steering column upper and lower shrouds. ...

Emergency Towing
There are three popular methods of towing a vehicle : - The operator loads the vehicle on the back of truck. This is best way of transporting the vehicle. ...