Kia Rio: Receiver-Drier Replacement
1. |
Remove the condenser.
|
2. |
Remove the cap (B) on the bottom of the condenser with L wrench
(A).
Tightening torque :
2.7~3.2 N.m (0.28~0.33 kgf.m, 2.0~2.4 lb-ft)
|
|
3. |
Remove the desiccant (A) from condenser using a long nose plier.
Check for crumbled desiccant and clogged bottom cap filter.
|
4. |
Apply air conditioning compressor oil along the O-rings and threads
of the new bottom cap.
|
5. |
Insert the new desiccant into the receiver drier tank. The desiccant
must be sealed in vacuum before it is exposed to air for use.
|
6. |
Install the new bottom cap to the condenser.
|
|
•
Always replace the desiccant and bottom cap at
the same time.
|
|
•
Replace the O-rings with new ones at each fitting,
and apply a thin coat of refrigerant oil before installing
them. Be sure to use the right O-rings for R-134a to
avoid leakage.
|
|
•
Be careful not to damage the radiator and condenser
fins when installing the condenser.
|
|
•
Be sure to install the lower mount cushions of
condenser securely into the holes.
|
|
•
Charge the system, and test its performance.
|
1.
Recover the refrigerant with a recovery/recycling/charging station.
2.
Disconnect the negative (-) battery terminal.
3.
...
The A/C Pressure Transducer (APT) convert the pressure value of high pressure
line into voltage value after measure it. By converted voltage value, engine
ECU controls cooling fan by operatin ...
See also:
Door Switch Description
Via the seat belt/Door switch, the ISG function can detect that the driver
has fastened the seat belt/door. If the driver has not fastened the seat belt/door,
the ISG function reacts as follo ...
Speakers Removal
Front Speaker
1.
Remove the front door trim panel.
(Refer to the BD group - "Front door")
2.
Remove the front speaker (A) ...
Child restraint system
Children riding in the car should sit in the rear seat and must always be properly
restrained to minimize the risk of injury in an accident, sudden stop or sudden
maneuver. According to accident s ...